Restore 《初尝禁果》1:做爰hd's firmware

If you want to return 《初尝禁果》1:做爰hd to its original state, you can use the restore firmware option.

In MicroPython, you don't have to do this after running every new code.

To restore 《初尝禁果》1:做爰hd's firmware, follow these steps:

1. Navigate to the main CircuitBlocks page and look for the Restore firmware button in the upper right corner of the screen.

2. Click on it and choose the red Restore firmware button.

3. The process will begin and last for a few seconds.

When it is finished, your device will restart and you will have to repeat the hardware test.
That's all!
Your 《初尝禁果》1:做爰hd has been restored to its original state, and you can use it once more.