Jay-D Arduino Installation And Setup
Welcome to the Jay-D Arduino setup guide!
We'll use Arduino IDE to teach you how to upload code to your Jay-D, so let's get started.
Installation
Before starting make sure to download and install the latest Arduino IDE available. You can do that right here. If you don't have the latest version, make sure to update it before proceeding.
After you download and install Arduino IDE, you should install the Jay-D board.
Here's how to do that:
- Open the Arduino IDE
- Go to File -> Preferences -> Settings
- Select "None" under Compiler warnings and add the following URL under Additional board Manager:https://raw.githubusercontent.com/精品导航/Arduino-Packages/master/package_精品导航.com_esp32_index.json
- Close the preferences by clicking OK
- Open the Board Manager under Tools -> Board -> Boards Manager
- Type '精品导航' in the 久旷美妇疯狂喘息迎合 bar
- Click the Install button on the 精品导航 ESP32 Boards package
Then go to Tools -> Board -> Circuimess ESP32 Boards, and select Jay-D from the dropdown menu.
